Linux

Guest-Host Connection in Vmware through Firestarter

Posted by | 6 Comments

Following my previous post on VPNC, after modifying the user-pre file in Firestarter, it somehow screws-up my guest-host connections in Vmware. The host, running on Ubuntu 8.04, no longer be able to connect to it guests, and vice-versa. The following is what I did to make the connection works. I had to post this up for future reference, just in case I forgot.

1. Edit /etc/firestarter/user-pre . First, make the file writable:
sudo chmod 600 /etc/firestarter/user-pre

2. Edit the file:
sudo gedit /etc/firestarter/user-pre

3. Copy the following to the file:
$IPT -A INPUT -i vmnet+ -j ACCEPT
$IPT -A OUTPUT -o vmnet+ -j ACCEPT

4. Save the file and close.
5. Change the user-pre file permission back to the way it was:
sudo chmod 440 /etc/firestarter/user-pre

6. Restart Firestarter:
sudo /etc/init.d/firestarter restart

Now the connection is restored. Both the guest and host can share files, access the web servers, etc.

VPN Connection in Ubuntu using VPNC

Posted by | 7 Comments

I’ve been using VPNC in my Ubuntu to access my company’s VPN from https://getmoreprivacy.com/ for quite some time now. The story is, I’ve tried using Cisco VPN, but it will only get me as far as connecting to the VPN server. When I’m trying to access the company’s intranet, I’ll get a “page not found” error slapped to my face. I’ve found out it has to do with my machine’s Firestarter. I doesn’t really feel comfortable removing or stopping my Firestarter, so I have to find out ways to access VPN, and still having my Firestarter active.

After doing some googling, I stumbled upon VPNC, alternate VPN client for Cisco servers.

Installing VPNC:
1. Enter the following in the terminal to install VPNC on your computer:
sudo apt-get install vpnc resolvconf

2. Create a <filename>.conf file in /etc/vpnc/ . Enter following command to create myoffice.conf:
sudo gedit /etc/vpnc/myoffice.conf

3. Copy the following text to that myoffice.conf file:
IPSec gateway <server IP address>
IPSec ID <group name>
IPSec secret <group password>
Xauth username <username>

You can get the values for <server IP address>, <group name> and <group password> by opening your Cisco VPN client .pcf file. For <group password>, the value is encrypted. What you have to do is, copy all the characters from the “enc_GroupPwd” value, go to this cisco vpnclient password decoder site, paste the characters and click “Decode”. It will give you the decrypted group password. Now, copy the decrypted password and replace it with the <group password> in your myoffice.conf. Replace your user name to <username>. Save the file and close.

Running VPNC:
You can run VPNC simply by running this command:
sudo vpnc myoffice /etc/vpnc/myoffice.conf

Enter your VPN password once connected. To disconnect:
sudo vpnc-disconnect

Making it work with Firestarter:
You might have a problem accessing for company’s intranet if you have Firestarter installed. Instructions below will make it work.

1. Edit /etc/firestarter/user-pre . First, make the file writable:
sudo chmod 600 /etc/firestarter/user-pre

2. Edit the file:
sudo gedit /etc/firestarter/user-pre

3. Copy the following to the file:
iptables -A INPUT -j ACCEPT -s xxx.xxx.xx.xxx -p esp
iptables -A INPUT -j ACCEPT -s xxx.xxx.xx.xxx -p udp -m multiport --sports isakmp,10000
iptables -A INPUT -j ACCEPT -i tun+
iptables -A OUTPUT -j ACCEPT -d xxx.xxx.xx.xxx -p esp
iptables -A OUTPUT -j ACCEPT -d xxx.xxx.xx.xxx -p udp -m multiport --dports isakmp,10000
iptables -A OUTPUT -j ACCEPT -o tun+

Replace your VPN server’s IP address to the xxx.xxx.xx.xxx.

4. Save the file and close.
5. Change the user-pre file permission back to the way it was:
sudo chmod 440 /etc/firestarter/user-pre

6. Restart Firestarter:
sudo /etc/init.d/firestarter restart

Thanks to Arun for the tips.